Module 3.1 - Applied Registration Techniques
Introduction Registration
Chapter 3.0 introduced the basics of the Registration process, which is the process of
integrating a project’s ScanWorlds into a single coordinate system as a registered ScanWorld.
This Module will show how to apply these already learned basic registration techniques on a real
project using a mixed set of constraints.
Objectives of this Module
The objectives of this exercise are to:
•
be confronted and work with a real project situation
•
learn how to handle and correct typical errors made in the field
•
show how to combine various registration techniques (mixed constraint types)
•
see how Grouping can aid in the registration process
•
transform local scan coordinates into a world coordinate system (geo-referencing)
Files Used
•
Blutenburg 2.imp
•
Geo Reference Blutenburg GK.txt
To Next Page
Loading...
