Leica Cyclone - Adding Constraints and Register; Global Registration

38
-
52
Module
3.1
–
Applied Registra
t
ion
Registration
In the
ScanWorld’s Constraint
Tab you can see that the ScanWorld
Geo Reference
Blutenburg.txt
is now listed in the
Ungrouped
section.
Figure 59
• Select ScanWorld
Geo Reference
Blutenburg.txt
if not already selected
• In the main menu go to
ScanWorld | Set
Home ScanWorld
.
The ScanWorld is now displayed bold, indicating it as the Home ScanWorld.
6.4 Global Registration
Adding Constraints and Register
For the global registration we need to add the target constraints for the newly added
ScanWorld.
• From the registration menu go to
Constraint | Auto-Add Constraints
• Switch to the
Constraint List
to review the new additions.