Leica Cyclone - Module 2.0 - Introduction to Cyclone

Introduction to Cyclone Module 2.0 – Na
vigator & Navigator’s Objects
1 -
22
Module 2.0 - Introduction to Cyclone
Introduction
The Cyclone scanning and point processing software application was developed by Leica for the
efficient operation all of the Leica HDS scanning systems. Cyclone has become the industry
standard for capturing point-clouds, processing them, and integrating the information into
conventional CAD applications.
This module is designed to introduce a new user to Cyclone and commonly used features. We
will look at a sample project with two scan positions and begin to understand some fundamental
concepts how to navigate through a cloud of points and general workflows.
Objectives
The objectives of this training module will be learning how to:
• Understand the basics of the Cyclone application.
• Use the Cyclone Navigator and its features, functions and tools.
• Manage Cyclone Databases.
• Open an existing database and explore the contents.
• Use on-line help.
Files to Use
• QuickStart.imp