Settings on the Apple device
•
Start the Apple iPad by pressing the ON/Off button and unlock the system.
•
Select
Settings
to define the correct WiFi settings.
•
In
Settings, WiFi
select the network P30_185xxxx with 185xxxx being the
scanner’s serial number.
•
Enter the password of the scanner when connecting to this network for the
first time.
•
The default password is
abcd-abcd
.
Initialize RDP Lite
•
Install the free app Remote Desktop Lite (RDP Lite).
It provides access to a PC running Windows.
•
In the App Store search for „rdp lite“ to find it.
•
www.mochasoft.dk
Start the free app RDP Lite
In Mocha RDP Lite select
Configure
and go to
Edit Connections
.
In the configuration list create a connection with
Windows Workstation IP address = 192.168.173.1
Windows Workstation Port = 3389
User = sbc
Password = sbc
In Mocha RDP Lite select
Connect
and select the connection to the scanner.
RDP Lite will establish a remote connection on your Apple device to the scanner.
Use P30 MMI remotely
After some seconds the ScanStation P30 screen with the active MMI is displayed and the WiFi
icon in the status bar changed to ON.
Use the arrow icon to minimize the RDP control bar and get full access to the ScanStation P30’s
interface.
The P30 is now ready for remote control via iPad touchscreen (the little green dot represents
the point of selection).
To Next Page
Loading...
