12 - 12 Module 6.0 -
Export / Import
Data Export
5 Export pcE Application Files
This command from inside a ModelSpace File | Export for pcE Application…
File | Export for pcE Application… File | Export for pcE Application…
File | Export for pcE Application… saves the current
ModelSpace View as a point cloud data file for use in pcE applications.
Figure 14
pcE applications are:
•
Cyclone II Topo
•
Leica ForensicMAP Pro
•
Point CloudCAD
For Cyclone II TOPO, a Cyclone II TOPO Work File will be created.
To Next Page
