Organization/Visualization point clouds
3.2 Unify clouds from Navigator window
A ModelSpace can also be unified from the Cyclone Navigator window.
•
Select
SelectSelect
Select the ModelSpace to unify
•
Now go to Tools |
Tools | Tools |
Tools | Unify ModelSpace
Unify ModelSpaceUnify ModelSpace
Unify ModelSpace…
……
…or chose the same command from the right-click menu.
Then follow the steps described in chapter 3.1.
Figure 20
It is recommended to run Unify from the Navigator as it will then not take any
additional computer resources displaying the data.
To Next Page
