Leica Cyclone - General Remark; Settings on the Scanstation P30; Settings on the Viva Controller

Scanner & Scanning Features
Module 1.0
-
Scanning with ScanStation
P30
47
-
60
Settings on the ScanStation P30
• Select
Status
|
Connections
.
• Switch
WiFi Operation
to
Always On
.
• In
WiFi Connection
choose
Access point mode
.
Figure 50
Settings on the Viva Controller
• Start the P30 Remote Control application on your Leica Viva Controller by
double-clicking the
P30 Remote Control
desktop icon.
• Within the
ScanStation P30 Remote Control
dialog press
Find scanner
and
wait for your Leica ScanStation P30 to be listed within the list of available
scanners.
• As soon as your Leica ScanStation P30 is listed, select it and press
Connect
.
• Close the
Leica P30 WiFi…
window as well as the
ScanStation P30 Remote
Control
dialog by pressing of the appropriate dialog.
General Remark
The USB port of the Leica Viva Controller will not replace the USB port of the Leica ScanStation
P30 while you are connected to the scanner. In order to download scanning projects, upload
control point files, or system files you always have to use the USB port of the Leica ScanStation
P30.