7 - 8
Try making more types of measurements, such as the angle between the pole and the baseline,
the distance of the free throw or three-point line to the hoop, and the height of the rim from
the ground (elevation). Allow these measurements to continue saving in the Measurements
dialog. Rename the name field for each measurement if needed.
3.3 Obtaining Multiple Measurements from a Point
It is possible to take multiple measurements – simultaneous measurements – from a single point
to a number of consecutive points.
•
Change to the the Multi-pick Mode.
•
Select the point e.g. the lamp (Measurements will be made from the first point picked to each
of the other multi-selected points.)
•
Click on a number of other points – the curbstone for example
•
Obtain measurements by going to Tools | Measure | Distance | Point to Point
Tools | Measure | Distance | Point to PointTools | Measure | Distance | Point to Point
Tools | Measure | Distance | Point to Point
Figure 10
To Next Page
