Settings on the Android device
•
Start the Android device.
•
Select
Settings
to define the correct WiFi settings.
•
Access the WiFi network list by touching the WiFi entry.
•
In
Settings, WiFi
select the network P30_185xxxx with 185xxxx being the
scanner’s serial number.
•
Enter the password of the scanner when connecting to this network for the
first time.
•
The default password is
abcd-abcd
.
Initialize RDP Lite
•
Install the free app Remote Desktop Lite (RDP Lite).
•
It provides access to a PC running Windows.
•
In the Google Play Store search for „rdp lite“ to find it.
•
www.mochasoft.dk
Start the free app RDP Lite
In Mocha RDP Lite select
Configure
and go to
Edit Connections
.
In the configuration list create a connection with
Windows Workstation IP address = 192.168.173.1
Windows Workstation Port = 3389
User = sbc
Password = sbc
Scroll down to Color and select Screen.
Select 640x480 from the pop up.
Use the Back button from the Android device to access the connections list.
The created connection is listed as sbc@192.168.173.1.
Select the sbc@192.168.173.1 to establish the remote connection from the Android device to
the scanner.
Hold sbc@192.168.173.1 to access the edit menu.
To Next Page
