a) In the Radio Options b/g/n (2.4GHz) section, configure the following options:
• Channelization: Select the channel width. Options include 20MHz, 40MHz, or 80MHz.
• Channel: Select Auto or manually assign a channel for the 2.4GHz radio.
• TX Power Adjustment: Manually set the transmit power on all 2.4GHz radios (default
is Full).
b) In Radio Options a/n (5GHz), configure the following options:
• Channelization: Select 20MHz or 40MHz channel width.
• Channel: Select Auto or manually assign a channel for the 5GHz radio.
• TX Power Adjustment: Manually set the transmit power on all 5GHz radios (default is
Full).
6. Configure AP GRE Tunnel Options.
a) Tunnel Type: Select an option for tunneling WLAN traffic back to the controller:
• Ruckus GRE
• SoftGRE
• SofteGRE + IPSec
b) Tunnel Encryption: Select the Enable tunnel encryption check box if you want managed
APs to decrypt 802.11 packets, and then use an AES-encrypted tunnel to send them to
the controller. When WLAN traffic is tunneled to the controller, only the management traffic
is encrypted while data traffic is unencrypted by default.
• Tunnel MTU Options: Manually set the maximum transmission unit (MTU) or use Auto
(default). MTU is the size of the largest protocol data unit (in bytes) that can be passed
on the controller network.
7. Configure the AP SNMP Options: select the Enable AP SNMP check-box to configure the
SNMPv2 and SNMPv3 settings.
8. Configure Advanced Options.
• Channel Mode: Select the Allow indoor channels check box if you want to allow ZoneFlex
outdoor APs to use indoor-use only channels. For more information on channel mode,
see Channel Mode on page 76.
• Background Scanning: If you want APs to automatically evaluate radio channel usage,
enable and configure the background scanning settings on both the 2.4GHz and 5GHz
radios. By default, background scanning is enabled on both radios and set to run every
20 seconds.
9. Click Create New to create the zone template.
10. Continue to Step 2: Configure the AP Model-Specific Configuration.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
112
Managing Global Configuration, AP Tunnel Profiles, Templates, and AP Registration Rules
Working with Zone Templates
To Next Page
Loading...
