8. In the Secondary Server section, configure the settings of the secondary RADIUS server.
NOTE: The Secondary Server section is only visible if you selected the Enable backup
RADIUS server check box earlier.
• IP Address: Type the IP address of the secondary AAA server.
• Port: Type the port number of the secondary AAA server port number. The default RADIUS
server port number is 1812 and the default RADIUS Accounting server port number is
1813.
• Shared Secret: Type the AAA shared secret.
• Confirm Secret: Retype the shared secret to confirm.
9. Click Create New to create the AAA server for the zone template.
10. Continue to Step 4: Configure the Hotspot (WISPr) Services of the Zone Template.
Step 4: Configure the Hotspot (WISPr) Services of the Zone Template
Settings to configure a hotspot portal in the zone template.
NOTE: If you do not need to provide a hotspot portal to users, skip this section.
If you need more information about hotspots, including third party prerequisites, see Creating
and Managing Hotspots on page 267.
Follow these steps to configure the hotspot settings for the zone template.
1. Click Configuration > AP Zones.
2. On the sidebar, click Zone Templates.
The Zone Templates page appears.
3. Click the name of the zone template for which you want to configure a hotspot portal.
4. On the sidebar, click Hotspot (WISPr).
5. Click Create New.
The form for creating a new hotspot portal appears.
6. In the General Options section, configure the following options:
• Name: Type a name for the hotspot portal.
• Description: Type a description for the hotspot portal.
7. In the Redirection section, configure the following options:
• Smart Client Support: Select one of the following options:
• None: Select this option to disable Smart Client support on the hotspot portal.
• Enable: Selection this option to enable Smart Client support.
• Only Smart Client Allowed: Select this option to allow only Smart Clients to connect
to the hotspot portal.
For more information, see Configuring Smart Client Support on page 279.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
115
Managing Global Configuration, AP Tunnel Profiles, Templates, and AP Registration Rules
Working with Zone Templates
To Next Page
Loading...
