Ruckus Wireless Virtual SmartZone - Page 125

3. Click the name of the WLAN template for which you want to create an AAA server.
4. On the sidebar, click AAA.
The AAA Servers page appears.
5. Click Create New.
The Create New Zone RADIUS Server form appears.
6. Configure General Options.
• Name: Type a name for the AAA server that you are adding.
• Type: Select the type of AAA server that you have on the network. Options include:
• RADIUS
• RADIUS Accounting
• Active Directory
• LDAP
• Backup RADIUS: Select the Enable backup RADIUS servercheck box if a secondary
RADIUS server exists on the network. Configure the settings in step 8 on page 125.
7. In the Primary Server section, configure the settings of the primary RADIUS server.
• IP Address: Type the IP address of the AAA server.
• Port: Type the port number of the AAA server. The default RADIUS server port number is
1812 and the default RADIUS Accounting server port number is 1813.
• Shared Secret: Type the AAA shared secret.
• Confirm Secret: Retype the shared secret to confirm.
8. In the Secondary Server section, configure the settings of the secondary RADIUS server.
NOTE: The Secondary Server section is only visible if you selected the Enable backup
RADIUS servercheck box earlier.
• IP Address: Type the IP address of the secondary AAA server.
• Port: Type the port number of the secondary AAA server port number. The default RADIUS
server port number is 1812 and the default RADIUS Accounting server port number is
1813.
• Shared Secret: Type the AAA shared secret.
• Confirm Secret: Retype the shared secret to confirm.
9. Click Create New to create the AAA server for the WLAN template.
10. Continue to Step 3: Configure the Hotspot (WISPr) Services of the WLAN Template on page
126.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
125
Managing Global Configuration, AP Tunnel Profiles, Templates, and AP Registration Rules
Working with WLAN Templates