• Effective from first use: This type of guest pass is valid from the time the user uses
it to authenticate with the controller until the specified expiration time. An additional
parameter (A Guest Pass will expire in X days) can be configured to specify when an
unused guest pass will expire regardless of use. The default is 7 days.
• Expire guest pass if not used within [ ] days: If you want this guest pass to expire if
it is unused after you generated it, type the number of days in the box (maximum value
is 365 days).
b) Max Devices Allowed: Set the number of users that can share this guest pass.
• Limited to [ ]: If you want a limited number of users to share this guest pass, click this
option, and then type the number in the box.
• Unlimited: If you want an unlimited number of users to share this guest pass, click this
option.
• Session Duration: If you clicked Unlimited, this option appears. If you want require
users to log on again after their sessions expire, select the Require guest re-login
after [ ] check box, and then select a time increment. If this feature is disabled,
connected users will not be required to re-log in until the guest pass expires.
11. In Guest List CSV File (at the top of the page), click Browse, and then select the CSV file
you edited earlier.
The page refreshes, and the number of guest passes that the controller has identified in the
CSV file appears below the Browse button.
12. Click Generate.
The page refreshes, and then the guest pass you generated appears in a table, along with
other guest passes that exist on the controller.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
333
Working with Local, Guest, and Remote Users
Working with Local, Guest, and Remote Users
To Next Page
Loading...
