Ruckus Wireless Virtual SmartZone - Page 39

DescriptionOption
an LBS server to the controller, see
Configuring Location Services on page 167.
Set the load thresholds on the AP at which it
will stop accepting new clients. See
Configuring Client Admission Control.
Client Admission Control
Set the time after which the AP will reboot
automatically when it is unable to reach the
default gateway or the control interface.
AP Reboot Timeout
• Reboot AP if it cannot reach default
gateway after [ ] minutes: The default
timeout is 30 minutes.
• Reboot AP if it cannot reach the
controller after [ ]: The default timeout is
2 hours.
10. Click OK to finish creating your first AP zone.
When the controller completes creating the AP zone, the following confirmation message
appears: AP zone created successfully. Do you want to view the
configuration details?
11. Click Yes to view the AP zone details, or click No to close the confirmation message and
return to the AP zone list.
You have completed creating an AP zone. You can create additional AP zones as needed.
SmartCell Gateway 200/Virtual SmartZone High-Scale for Release 3.4.1 Administrator Guide
39
Managing Ruckus Wireless AP Zones
Working with AP Zones