e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C © 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved
ERROR CODE and TROUBLESHOOTING
8 - 22
CE00 Process related
service call
Communication error between finisher and
punch unit: Communication error between
finisher controller PC board and punch
controller PC board
[MJ-1103/1104 (when MJ-6102 is installed)]
P. 8-156
CE10 Image control
related service call
Image quality sensor abnormality (OFF level):
The output value of this sensor is out of a
specified range when sensor light source is
OFF.
P. 8-164
CE20 Image quality sensor abnormality (no pattern
level): The output value of this sensor is out of
a specified range when the image quality
control test pattern is not formed.
P. 8-164
CE40 Image quality control test pattern abnormality:
The test pattern is not formed normally.
P. 8-166
CE41 Image quality TRC control test pattern
abnormality: The image quality TRC control
test pattern is not printed normally.
P. 8-168
CE42 Image quality TRC control test pattern
abnormality (EFI printer board): Image quality
TRC control test pattern is not printed
normally.
P. 8-170
CE50 Temperature/humidity sensor abnormality:
The output value of this sensor is out of a
specified range.
P. 8-171
CE60 Copy process
related service call
Drum thermistor-Y abnormality: The output
value of the drum thermistor-Y is out of a
specified range.
P. 8-171
CE71 Drum phase adjustment abnormality: Drum
phase sensors (Color drum phase sensor and
K drum phase sensor) are not turned ON after
the drum motor was rotated for a specified
period of time.
P. 8-172
CE90 Drum thermistor-K abnormality: The output
value of the drum thermistor-K is out of a
specified range.
P. 8-171
CEC0 2nd transfer roller position detection
abnormality: The 2nd transfer roller does not
contact/release normally.
P. 8-183
CEC5 Incorrect cam position alarm during 2nd
transfer
P. 8-184
CF10 Finisher related
service call
Communication module SRAM reading failure. P. 8-156
CF90 Laser optical unit
related service call
Laser optical unit shutter abnormality. P. 8-139
CFA0 Paper transport
service call
Media sensor output abnormality before paper
reaching: The sensor output value before
paper is reached to the media sensor is not
normal.
P. 8-140
CFA1 Media sensor output abnormality during paper
passing: The sensor output value while paper
is being passed is not normal.
P. 8-140
Error code Classification Contents Troubleshooting
To Next Page
Loading...
