8
© 2011 - 2015 TOSHIBA TEC CORPORATION All rights reserved e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
8 - 23
F070 Communication
related service call
Communication error between System-CPU
and Engine-CPU
P. 8-130
F090 Circuit related
service call
SRAM abnormality on the SYS board P. 8-136
F100_0 Other service call HDD format error: Operation of HDD key data
fails.
P. 8-185
F100_1 HDD format error: Encryption key data of
either the SYS board or the SRAM board for
the SYS board are damaged.
P. 8-185
F100_2 HDD format error: Encryption key data of both
the SYS board and the SRAM board for the
SYS board are damaged.
P. 8-186
F101_0 HDD connection error (HDD connection
cannot be detected.)
P. 8-187
F101_1 Root partition mount error (HDD formatting
fails.): The HDD cannot be connected
(mounted) caused by damage to the areas in
which the program is mainly stored.
P. 8-187
F101_2 Partition mount error: The HDD cannot be
connected (mounted) caused by damage to
areas other than those described in the
F101_1 and F101_4 to F101_9 errors.
P. 8-187
F101_3 Partition mount error: The HDD cannot be
connected (mounted) caused by damage to
areas other than those described in the
F101_1 and F101_4 to F101_9 errors.
P. 8-187
F101_4 Partition mount error: The HDD cannot be
connected (mounted) caused by damage to
the “/work” partition.
P. 8-188
F101_5 Partition mount error: The HDD cannot be
connected (mounted) caused by damage to
the “/registration” partition.
P. 8-189
F101_6 Partition mount error: The HDD cannot be
connected (mounted) caused by damage to
the “/backup” partition.
P. 8-190
F101_7 Partition mount error: The HDD cannot be
connected (mounted) caused by damage to
the “/imagedata” partition.
P. 8-191
F101_8 Partition mount error: The HDD cannot be
connected (mounted) caused by damage to
the “/storage” partition.
P. 8-192
F101_9 Partition mount error: The HDD cannot be
connected (mounted) caused by damage to
the “/encryption” partition.
P. 8-193
F102 HDD start error: HDD cannot become ‘Ready’
state.
P. 8-194
F103 HDD transfer time-out: Reading/writing cannot
be performed in the specified period of time.
P. 8-194
F104 HDD data error: Abnormality is detected in the
data of HDD.
P. 8-194
F105 HDD other error P. 8-194
Error code Classification Contents Troubleshooting
To Next Page
Loading...
