7-10 Phaser 6300/6350 Color Laser Printer Service Manual
18. Remove the 2 screws (self-tapping, plastic 10 mm) and 3 screws (metal, 6 mm)
that secure the HVPS to the frame.
19. Move the HVPS left to release the retaining hooks on the front edge of the board.
20. Unplug connectors (P/J139, 140, 141) and remove the HVPS.
Note
To avoid spilling toner, do not tilt the Developer Frame Assembly backwards
(away from the rollers) once it is removed from the printer. Be sure to store the
removed Developer Frame Assembly upright on a flat surface with it's handle
upward.
s6300-223
P/J140
P/J139
P/J141
HVPS
6 mm
10 mm
To Next Page
Loading...
