7-12 Phaser 6300/6350 Color Laser Printer Service Manual
24. Open the replacement Developer Assembly packaging and remove the shipping
plugs and roller cover from each assembly. Use the plugs, cover and packaging to
repack the expended part for return.
25. Release the left and right white stoppers for each Developer Assembly by sliding
each stopper upwards to the unlock position and replace all four Developer
Assemblies.
Replacement Note
Inspect each Developer Assembly slot prior to installing the replacement to
ensure the left and right tracking spring (PL7.1.13) is securely attached to
the Developer Frame Assembly. There should be 2 tracking springs per
Developer Assembly.
s6300-379
s6300-198
Developer Assembly
To Next Page
Loading...
