Xerox Phaser 6300 Service Manual

Reference A-5
78 Engine Firmware Failure 78. CRUM data firmware failure.
79 Engine Firmware Failure 79. Engine Control Board ROM error.
80 Hard Drive Failure. IDE Hard Disk failure.
81 Engine Communication Failure. Unable to properly communicate with the Engine Control
Board.
83 Engine NVRAM Failure. Engine Control Board NVRAM error.
86 Cyan Toner Cartridge Failure. Cyan cartridge CRUM data error.
87 Magenta Toner Cartridge Failure. Magenta cartridge CRUM data error.
88 Yellow Toner Cartridge Failure. Yellow cartridge CRUM data error.
89 Black Toner Cartridge Failure. Black cartridge CRUM data error.
90 Replace Cyan Toner Cartridge. The Cyan Toner Cartridge CRUM indicates that the
cartridge is not a Xerox product (CRUM ID error).
91 Replace Magenta Toner Cartridge. The Magenta Toner Cartridge CRUM indicates that the
cartridge is not a Xerox product (CRUM ID error).
92 Replace Yellow Toner Cartridge. The Yellow Toner Cartridge CRUM indicates that the
cartridge is not a Xerox product (CRUM ID error).
93 Replace Black Toner Cartridge. The Black Toner Cartridge CRUM indicates that the
cartridge is not a Xerox product (CRUM ID error).
94 Non-Phaser 6300 Fuser. The Fuser CRUM indicates that the installed Fuser is not a 6300/
6350 replacement part (Fuser CRUM ID error).
95 Non-Xerox Imaging Unit. The Imaging Unit CRUM indicates that the Imaging Unit is not a
genuine Xerox replacement part.
96 Replace Non-Xerox Cyan Toner Cartridge. User selected to not to use a third-party Toner
Cartridge when prompted.
97 Replace Non-Xerox Magenta Toner Cartridge. User selected to not to use a third-party
Toner Cartridge when prompted.
98 Replace Non-Xerox Yellow Toner Cartridge. User selected to not to use a third-party Toner
Cartridge when prompted.
99 Replace Non-Xerox Black Toner Cartridge. User selected to not to use a third-party Toner
Cartridge when prompted.
101 Replace Maintenance Kit. A Developer Assembly has reached its End of Life count of
approx. 300K. At 360K, the error becomes a hard stop.
102 Environment Sensor Failure. This indicates a Temperature/Humidity Sensor signal failure.
103 Fuser Motor Failure. This indicates a Fuser Motor rotation signal error.
104 Developer Motor Failure. This indicates a Developer Motor rotation signal error.
105 Main Motor Failure. This indicates a Main Drive Motor rotation signal error.
106 Motor Failure. General motor error.
Printer Status Codes (Continued)
Code Description

Xerox Phaser 6300 Specifications

General

Brand	Xerox
Model	Phaser 6300
Category	Printer
Language	English