Reference A-7
176 Wrong paper size: Load Tray 1 (MPT) with [size] [type]. The Paper Size Switch indicates
that the paper loaded in Tray 1 (MPT) does not match the size specified by the print job.
177 Wrong paper size: Load Tray 2 with [size] [type]. The Paper Size Switch indicates that the
paper loaded in Tray 2 does not match the size specified by the print job.
178 Wrong paper size: Load Tray 3 with [size] [type]. The Paper Size Switch indicates that the
paper loaded in Tray 3 does not match the size specified by the print job.
179 Wrong paper size: Load Tray 4 with [size] [type]. The Paper Size Switch indicates that the
paper loaded in Tray 4 does not match the size specified by the print job.
180 Wrong paper size: Load Tray 5 with [size] [type]. The Paper Size Switch indicates that the
paper loaded in Tray 5 does not match the size specified by the print job.
181 Wrong paper size: Load Tray 1 (MPT) with [size] [type]. The Paper Size Switch indicates
that the paper loaded in Tray 1 (MPT) does not match the size specified by the print job.
182 Wrong paper size: Load Tray 2 with [size] [type]. The Paper Size Switch indicates that the
paper loaded in Tray 2 does not match the size specified by the print job.
183 Wrong paper size: Load Tray 3 with [size] [type]. The Paper Size Switch indicates that the
paper loaded in Tray 3 does not match the size specified by the print job.
184 Wrong paper size: Load Tray 4 with [size] [type]. The Paper Size Switch indicates that the
paper loaded in Tray 4 does not match the size specified by the print job.
185 Wrong paper size: Load Tray 5 with [size] [type]. The Paper Size Switch indicates that the
paper loaded in Tray 5 does not match the size specified by the print job.
186 Paper Not Available Load Tray 1 (MPT) with [size] [type]. The Paper Size Switch indicates
that the paper loaded in Tray 1 (MPT) does not match the size specified by the print job.
187 Paper Not Available Load Tray 2 with [size] [type]. The Paper Size Switch indicates that the
paper loaded in Tray 2 does not match the size specified by the print job.
188 Paper Not Available Load Tray 3 with [size] [type]. The Paper Size Switch indicates that the
paper loaded in Tray 3 does not match the size specified by the print job.
189 Paper Not Available Load Tray 4 with [size] [type]. The Paper Size Switch indicates that the
paper loaded in Tray 4 does not match the size specified by the print job.
190 Paper Not Available Load Tray 5 with [size] [type]. The Paper Size Switch indicates that the
paper loaded in Tray 5 does not match the size specified by the print job.
191 Output Tray is Full Unload Paper. The Full Stack Sensor indicates a full Output Tray.
192 Replace Cyan Toner Cartridge. Cyan cartridge life counter is at end of life.
193 Replace Magenta Toner Cartridge. Magenta cartridge life counter is at end of life.
194 Replace Yellow Toner Cartridge. Yellow cartridge life counter is at end of life.
195 Replace Black Toner Cartridge. Black cartridge life counter is at end of life.
196 Replace Imaging Unit. Imaging Unit life counter is at end of life.
197 Replace Transfer Roller. The Toner Full Sensor indicates the waste toner reservoir is full.
198 Cyan Developer Empty. Cyan Developer Assembly life counter is at end of life.
Printer Status Codes (Continued)
Code Description
To Next Page
Loading...
