Access Control Lists (ACL) | 117
Usage
Information
The order option is relevant in the context of the Policy QoS feature only. The following applies:
• The seq sequence-number is applicable only in an ACL group.
• The
order option works across ACL groups that have been applied on an interface via QoS policy
framework.
• The order option takes precedence over the seq sequence-number.
• If
sequence-number is not configured, then rules with the same order value are ordered
according to their configuration order.
• If the sequence-number is configured, then the sequence-number is used as a tie breaker for
rules with the same order.
If the sequence-number is configured, then the sequence-number is used as a tie breaker for rules
with the same order.
Related
Commands
Common MAC Access List Commands
The following commands are available within both MAC ACL modes (Standard and Extended) and do
not have mode-specific options.
The MXL 10/40GbE Switch IO Module platform supports both ingress and egress MAC ACLs.
The following commands allow you to clear, display and assign MAC ACL configurations.
• clear counters mac access-group
• mac access-group
• show mac access-lists
• show mac accounting access-list
clear counters mac access-group
Clear counters for all or a specific MAC ACL.
Syntax
clear counters mac access-group [mac-list-name]
Parameters
Command Modes
EXEC Privilege
Command
History
deny Configures a filter to drop packets.
permit Configures a filter to forward packets.
mac-list-name
(OPTIONAL) Enter the name of a configured MAC access list.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
To Next Page
Loading...
