Dell Force10 MXL Blade - Monitor Session

434 | Port Monitoring
www.dell.com | support.dell.com
description
Enter a description of this monitoring session.
Syntax
description {description}
To remove the description, use the no description {description} command.
Parameters
Defaults
none
Command Modes
MONITOR SESSION (conf-mon-sess-session-ID)
Command
History
Related
Commands
monitor session
Create a session for monitoring traffic with port monitoring.
Syntax
monitor session session-ID
To delete a session, use the no monitor session session-ID command.
To delete all monitor sessions, use the no monitor session all command.
Parameters
Defaults
none
Command Modes
CONFIGURATION
Command
History
Example
Figure 22-1. monitor session Command Example
Usage
Information
The monitor command is saved in the running configuration at the Monitor Session mode level and can
be restored after a chassis reload.
Related
Commands
description
Enter a description regarding this session(80 characters maximum).
Version 8.3.16.1 Introduced on M I/O Aggregator
monitor session Enables a monitoring session.
session-ID
Enter a session identification number.
Range: 0 to 65535
Version 8.3.16.1 Introduced on M I/O Aggregator
FTOS(conf)# monitor session 60
FTOS(conf-mon-sess-60)
show monitor session Displays the monitor session
show running-config monitor session Displays the running configuration of a monitor session