Dell Force10 MXL Blade - Show File; Show File-Systems

28 | File Management
www.dell.com | support.dell.com
show file
Display contents of a text file in the local filesystem.
Syntax
show file url
Parameters
Command Modes
EXEC Privilege
Command
History
Example
Figure 3-6. show file Command Example (Partial)
Related
Commands
show file-systems
Display information about the file systems on the system.
Syntax
show file-systems
Command Modes
EXEC Privilege
Command
History
url
Enter one of the following:
• For a file on the internal Flash, enter flash:// followed by the filename.
• For a file on the external Flash, enter usbflash:// followed by the filename.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS#show file flash://startup-config
! Version E8-3-16-29
! Last configuration change at Thu Apr 26 19:19:02 2012 by default
! Startup-config last updated at Thu Apr 26 19:19:04 2012 by default
!
boot system stack-unit 0 primary system: A:
boot system stack-unit 0 secondary tftp://10.11.200.241/dt-m1000e-5-c2
boot system gateway 10.11.209.254
!
redundancy auto-synchronize full
redundancy disable-auto-reboot stack-unit
!
redundancy disable-auto-reboot stack-unit 0
redundancy disable-auto-reboot stack-unit 1
redundancy disable-auto-reboot stack-unit 2
redundancy disable-auto-reboot stack-unit 3
redundancy disable-auto-reboot stack-unit 4
redundancy disable-auto-reboot stack-unit 5
!
service timestamps log datetime
logging coredump stack-unit all
!
hostname FTOS
--More--
format flash Erases all existing files and reformats the filesystem in the internal flash memory.
show file-systems Displays information about the file systems on the system.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module