Dell Force10 MXL Blade - Show Vlan Private-Vlan Mapping

446 | Private VLAN (PVLAN)
www.dell.com | support.dell.com
Table 23-2 defines the fields in the output.
Related
Commands
show vlan private-vlan mapping
Display primary-secondary VLAN mapping.
Syntax
show vlan private-vlan mapping
Defaults
none
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
The output of this command (Figure 23-10), displays the community and isolated VLAN IDs that are
associated with each primary VLAN.
Figure 23-10. show vlan private-vlan mapping Command Output
Related
Commands
Table 23-2. show interfaces Command Description
Field Description
Primary Displays the VLAN ID of the designated or associated primary VLAN(s)
Secondary Displays the VLAN ID of the designated or associated secondary VLAN(s
Type Displays the type of VLAN in which the listed interfaces reside
Active States whether the interface is operationally up or down
Ports Displays the interface IDs in the listed VLAN.
private-vlan mode Sets the mode of the selected VLAN to either community or isolated.
show interfaces private-vlan Displays the type and status of PVLAN interfaces.
show vlan private-vlan mapping Displays the primary-secondary VLAN mapping.
switchport mode private-vlan Sets the PVLAN mode of the selected port.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS# show vlan private-vlan mapping
Private Vlan:
Primary : 100
Isolated : 102
Community : 101
Unknown : 200
private-vlan mode Sets the mode of the selected VLAN to either community or isolated.
show interfaces private-vlan Displays the type and status of PVLAN interfaces.
show vlan private-vlan mapping Displays the primary-secondary VLAN mapping.
switchport mode private-vlan Sets PVLAN mode of the selected port.