Dell Force10 MXL Blade - iSCSI Optimization; Overview; Commands

iSCSI Optimization | 323
16
iSCSI Optimization
Overview
Internet Small Computer System Interface (iSCSI) optimization enables quality-of-service (QoS)
treatment for iSCSI storage traffic on an MXL Switch.
The following FTOS commands are used to configure and verify the iSCSI Optimization feature:
• advertise dcbx-app-tlv
• iscsi aging time
• iscsi cos
• iscsi enable
• iscsi priority-bits
• iscsi profile-compellant
• iscsi target port
• show iscsi
• show iscsi sessions
• show iscsi sessions detailed
• show run iscsi
advertise dcbx-app-tlv
Configure DCBX to send iSCSI TLV advertisements.
Syntax
advertise dcbx-app-tlv iscsi
To disable DCBX iSCSI TLV advertisements, use the no advertise dcbx-app-tlv iscsi command.
Defaults
Enabled.
Command Mode
PROTOCOL LLDP
Command
History
Usage
Information
You can configure iSCSI TLVs to be sent either globally or on a specified interface. The interface
configuration takes priority over global configuration.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module