Dell Force10 MXL Blade - Show Vlan

GARP VLAN Registration (GVRP) | 225
• The attribute that was being parsed had an invalid attribute length.
• The attribute that was being parsed had an invalid GARP event.
• The attribute that was being parsed had an invalid VLAN ID. The valid range is 1 - 4095.
A failed registration can occur for the following reasons:
• Join requests were received on a port that was blocked from learning dynamic VLANs (GVRP
Blocking state).
• An entry for a new GVRP VLAN could not be created in the GVRP database.
Related
Commands
show vlan
Display the global VLAN configuration.
Syntax
show vlan
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 12-4. show vlan Command Example
show gvrp Displays the GVRP configuration.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS# show vlan
Codes: * - Default VLAN, G - GVRP VLANs, R - Remote Port Mirroring VLANs, P -
Primary, C - Community, I - Isolated
Q: U - Untagged, T - Tagged
x - Dot1x untagged, X - Dot1x tagged
G - GVRP tagged, M - Vlan-stack, H - VSN tagged
i - Internal untagged, I - Internal tagged, v - VLT untagged, V - VLT tagged
NUM Status Description Q Ports
* 1 Active U Te 3/20
U Te 5/20-21
G 10 Active G Po128(Te 5/49) (dynamically
leanred vlan)
FTOS#