Dell Force10 MXL Blade - Advertise Med Voice

368 | Link Layer Discovery Protocol (LLDP)
www.dell.com | support.dell.com
Command Modes
CONFIGURATION (conf-lldp)
Command
History
Related
Commands
advertise med voice
Configure the system to advertise a dedicated IP telephony handset or other appliances supporting
interactive voice services.
Syntax
advertise med voice {vlan-id} | {priority-tagged number}
To return to the default, use the no advertise med voice {vlan-id layer2_priority DSCP_value} |
{priority-tagged number} command.
Parameters
Defaults
unconfigured
Command Modes
CONFIGURATION (conf-lldp)
Command
History
Related
Commands
advertise med voice-signaling
Configure the system to advertise when voice control packets use a separate network policy than voice
data.
Syntax
advertise med voice-signaling {vlan-id} | {priority-tagged number}
To return to the default, use the no advertise med voice-signaling {vlan-id layer2_priority
DSCP_value} |
{priority-tagged number} command.
Parameters
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
debug lldp interface Debugs LLDP
show lldp neighbors Displays the LLDP neighbors
show lldp neighbors Displays the LLDP running configuration
vlan-id
Enter the VLAN ID.
Range: 1 to 4094
priority-tagged number Enter the keyword priority-tagged followed the Layer 2 priority.
Range: 0 to 7
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
debug lldp interface Debugs LLDP
show lldp neighbors Displays the LLDP neighbors
show running-config lldp Displays the LLDP running configuration
vlan-id
Enter the VLAN ID.
Range: 1 to 4094
priority-tagged number Enter the keyword priority-tagged followed the Layer 2 priority.
Range: 0 to 7