Dell Force10 MXL Blade - Show Inventory

Control and Monitoring | 61
show inventory
Displays the switch type, components (including media), FTOS version including hardware
identification numbers and configured protocols.
Syntax
show inventory [media slot]
Parameters
Defaults
none
Command Modes
EXEC
Command
History
Usage
If there are no fibre ports in the unit, only the header under show inventory media is displayed. If
there are fibre ports but no optics inserted, the output displays the message “Media not present or
accessible”.
Example 1
Figure 4-16. show inventory for MXL 10/40GbE Switch IO Module Command Example
Example 2
Figure 4-17. show inventory media Command Example
media slot (OPTIONAL) Enter the keyword media followed by the stack ID of the stack member
for which you want to display pluggable media inventory.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS#show inventory
System Type : MXL-10/40GbE
System Mode : 1.0
Software Version : NAVASOTA-DEV-9-1-0-917
Unit Type Serial Number Part Number Revision
--------------------------------------------------------------
* 1 MXL-10/40GbE TW282921F00048 0NVH81 2.0
* - Management Unit
Software Protocol Configured
--------------------------------------------------------------
SNMP
LLDP
FTOS#
FTOS#show inv media
Slot Port Type Media Serial Number F10Qualid
-----------------------------------------------------------------------------
0 33 QSFP 40GBASE-CR4-1M APF11490011J2Q Yes
0 37 QSFP 40GBASE-SR4 MLJ004V No
0 41 QSFP 40GBASE-SR4 MLJ003P No
0 42 QSFP 40GBASE-SR4 MLJ003P No
0 43 QSFP 40GBASE-SR4 MLJ003P No
0 44 QSFP 40GBASE-SR4 MLJ003P No
0 45 QSFP 40GBASE-SR4 MLJ004Y No
0 46 QSFP 40GBASE-SR4 MLJ004Y No
0 47 QSFP 40GBASE-SR4 MLJ004Y No
0 48 QSFP 40GBASE-SR4 MLJ004Y No
0 49 Media not present or accessible
0 50 Media not present or accessible
0 51 Media not present or accessible
0 52 Media not present or accessible
0 53 QSFP 40GBASE-SR4 MK50012 No
0 54 QSFP 40GBASE-SR4 MK50012 No
0 55 QSFP 40GBASE-SR4 MK50012 No
0 56 QSFP 40GBASE-SR4 MK50012 No
FTOS#