Dell Force10 MXL Blade - Show Alarms; Show Command-History

56 | Control and Monitoring
www.dell.com | support.dell.com
Defaults
Not configured.
Command Modes
CONFIGURATION
Command
History
Usage
Information
If you do not specify parameters and enter service timestamps, it appears as service timestamps
debug uptime
in the running-configuration.
Use the show running-config command to view the current options set for the service timestamps
command.
show alarms
View alarms.
Syntax
show alarms
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 4-8. show alarms Command Example
show command-history
Display a buffered log of all commands entered by all users along with a time stamp.
Syntax
show command-history
Defaults
None.
Command Mode
EXEC
EXEC Privilege
Command
History
H
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS# show alarms
-- Minor Alarms --
Alarm Type Duration
---------------------------------------------------------------------------
No minor alarms
-- Major Alarms --
Alarm Type Duration
---------------------------------------------------------------------------
No major alarms
FTOS#
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module