Dell Force10 MXL Blade - Show Vlan Private-Vlan

444 | Private VLAN (PVLAN)
www.dell.com | support.dell.com
show vlan private-vlan
Display PVLANs and/or interfaces that are part of a PVLAN.
Syntax
show vlan private-vlan [community | interface | isolated | primary | primary_vlan | interface
interface]
Parameters
Defaults
none
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
Information
Examples of all types of command output are shown below. The first type of output is the result of not
entering an optional keyword. It displays a detailed list of all PVLANs and their member VLANs and
interfaces. The other types of output show details about PVLAN subsets.
Examples
Figure 23-3. show vlan private-vlan Command Example
show vlan private-vlan mapping Displays the primary-secondary VLAN mapping.
switchport mode private-vlan Sets the PVLAN mode of the selected port.
community (OPTIONAL) Enter the keyword community to display VLANs
configured as community VLANs, along with their interfaces.
interface
(OPTIONAL) Enter the keyword community to display VLANs
configured as community VLANs, along with their interfaces.
isolated (OPTIONAL) Enter the keyword isolated to display VLANs configured as
isolated VLANs, along with their interfaces.
primary (OPTIONAL) Enter the keyword primary to display VLANs configured as
primary VLANs, along with their interfaces.
primary_vlan
(OPTIONAL) Enter a private VLAN ID or secondary VLAN ID to display
interface details about the designated PVLAN.
interface interface (OPTIONAL) Enter the keyword interface and an interface ID to display
the PVLAN configuration of the designated interface.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS# show vlan private-vlan
Primary Secondary Type Active Ports
------- --------- --------- ------ ------------------------
10 primary Yes TenGig 2/1,3
100 isolated Yes TenGig 2/2
101 community Yes TenGig 2/10
20 primary Yes Po 10, 12-13
TenGig 3/1
200 isolated Yes TenGig 3/2,4-6
201 community No
202 community Yes TenGig 3/11-12