Dell Force10 MXL Blade - Show Software Ifm

Control and Monitoring | 69
show software ifm
Display interface management (IFM) data.
Syntax
show software ifm {clients [summary] | ifagt number | ifcb interface | stack-unit unit-ID |
trace-flags}
Parameters
Defaults
None
Command Mode
EXEC
EXEC Privilege
Command
History
PID Process ID
Process Process Name
ResSize Actual resident size of the process in memory
Size Process test, stack, and data size
Allocs Total dynamic memory allocated
Frees Total dynamic memory freed
Max Maximum dynamic memory allocated
Current Current dynamic memory in use
Table 4-2. Descriptions of show processes memory output
Field Description
clients Enter the keyword clients to display IFM client information.
summary
(OPTIONAL) Enter the keyword summary to display brief information about IFM
clients.
ifagt number Enter the keyword ifagt followed by the number of an interface agent to display software
pipe and IPC statistics.
ifcb interface Enter the keyword ifcb followed by one of the following interface IDs followed by the
slot/port information to display interface control block information for that interface:
• For a Port Channel interface, enter the keyword
port-channel followed by a
number:
Range: 1-128
• For a 10G Ethernet interface, enter the keyword
TenGigabitEthernet.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE.
stack-unit
unit-ID
Enter the keyword stack-unit followed by the stack member number to display IFM
information for that unit.
Range: 0-5
trace-flags
Enter the keyword trace-flags to display IFM information for internal trace
flags.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module