Dell Force10 MXL Blade - Policy-Based QoS Commands

Quality of Service (QoS) | 467
Policy-Based QoS Commands
Policy-based traffic classification is handled with class maps. These maps classify unicast traffic into
one of four classes in the MXL Switch. FTOS enables you to match multiple class maps and specify
multiple match criteria. Policy-based QoS is not supported on logical interfaces, such as port-channels,
VLANS, or loopbacks. The commands are:
• bandwidth-percentage
• class-map
• clear qos statistics
• description
• match ip access-group
• match ip dscp
• match ip precedence
• match mac access-group
• match mac dot1p
• match mac vlan
• policy-aggregate
• policy-map-input
• policy-map-output
• qos-policy-input
• qos-policy-output
• rate-police
• rate-shape
• service-policy input
• service-policy output
• service-queue
• set
• show qos class-map
• show qos policy-map
• show qos policy-map-input
• show qos policy-map-output
• show qos qos-policy-input
• show qos qos-policy-output
• show qos statistics
• show qos wred-profile
• test cam-usage
• trust
• wred
• wred-profile