Dell Force10 MXL Blade - Show Ip Udp-Helper

288 | Interfaces
www.dell.com | support.dell.com
Related
Commands
show ip udp-helper
Display the configured UDP helper(s) on all interfaces.
Syntax
show ip udp-helper
Defaults
none
Command Modes
EXEC
Example
Figure 14-46. show ip udp-helper Command Example
Command
History
Related
Commands
ip helper-address Configures the destination broadcast or host address for DHCP server.
debug ip udp-helper Enables debug and display the debug information on a console.
show ip udp-helper Displays the configured UDP helper(s) on all interfaces.
FTOS#show ip udp-helper
--------------------------------------------------
Port UDP port list
--------------------------------------------------
TenGig 10/0 656, 658
TenGig 10/1 All
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
debug ip udp-helper Enables debug and display the debug information on a console.
ip udp-broadcast-address Configures a UDP IP address for broadcast.
ip udp-helper udp-port
Enables the UDP broadcast feature on an interface either for all UDP ports or
a specified list of UDP ports.