Dell Force10 MXL Blade - Version; Clear Ip Rip; Debug Ip Rip

492 | Routing Information Protocol (RIP)
www.dell.com | support.dell.com
• show running-config rip
• timers basic
• version
auto-summary
Restore the default behavior of automatic summarization of subnet routes into network routes. This
command applies only to RIP version 2.
Syntax
auto-summary
To send sub-prefix routing information, use the no auto-summary command.
Default
Enabled.
Command Modes
ROUTER RIP
Command
History
clear ip rip
Update all the RIP routes in the FTOS routing table.
Syntax
clear ip rip
Command Modes
EXEC Privilege
Command
History
Usage
Information
This command triggers updates of the main RIP routing tables.
debug ip rip
Examine RIP routing information for troubleshooting.
Syntax
debug ip rip [interface | database | events [interface] | packet [interface] | trigger]
To turn off debugging output, use the no debug ip rip command.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module