Dell Force10 MXL Blade - Set Automatic-Tag

138 | Access Control Lists (ACL)
www.dell.com | support.dell.com
Defaults
Not configured
If no keyword (permit or deny) is defined for the route map, the permit action is the default.
Command Modes
CONFIGURATION
Command
History
\
Example
Figure 6-12. route-map Command Example
Usage
Information
Use caution when you delete route maps because if you do not specify a sequence number, all route
maps with the same map-name are deleted when you use no route-map map-name command.
Related
Commands
set automatic-tag
Configure a filter to automatically compute the tag value of the route.
Syntax
set automatic-tag
To return to the default, enter no set automatic-tag.
Defaults
Not configured.
Command Modes
ROUTE-MAP
Command
History
Related
Commands
deny (OPTIONAL) Enter the keyword deny to set the route map default as deny.
sequence-number
(OPTIONAL) Enter a number to identify the route map for editing and sequencing
with other route maps. You are prompted for a sequence number if there are
multiple instances of the route map.
Range: 1 to 65535.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS(conf)#route-map dempsey
FTOS(conf-route-map)#
show config Displays the current configuration.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
set metric Specifies the metric value assigned to redistributed routes.
set metric-type Specifies the metric type assigned to redistributed routes.
set tag Specifies the tag assigned to redistributed routes.