Dell Force10 MXL Blade User Manual

222 | GARP VLAN Registration (GVRP)
www.dell.com | support.dell.com
Related
Commands
protocol gvrp
Access GVRP protocol — (config-gvrp)#.
Syntax
protocol gvrp
Defaults
Disabled
Command Modes
CONFIGURATION
Command
History
Related
Commands
show config
Display the global GVRP configuration.
Syntax
show config
Command Modes
CONFIGURATION-GVRP
Command
History
Related
Commands
show garp timers
Display the GARP timer settings for sending GARP messages.
Syntax
show garp timers
Defaults
none
Command Modes
EXEC
EXEC Privilege
Command
History
show gvrp Displays the GVRP configuration including the registration
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
disable Globally disables the GVRP.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
gvrp enable Enables GVRP on physical interfaces and LAGs.
protocol gvrp Accesses the GVRP protocol.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module

Dell Force10 MXL Blade Specifications

General

Switching Capacity	1.28 Tbps
Forwarding Rate	952 Mpps
Product Type	Blade Switch
Latency	< 3 microseconds
Operating Temperature	0°C to 40°C (32°F to 104°F)
Redundancy	Yes
Management	CLI, SNMP, Web
Layer Support	Layer 2, Layer 3
Jumbo Frame Support	Up to 9216 bytes
Management Ports	1 x 10/100/1000 Mbps
Storage Temperature	-40°C to 70°C
Weight	4.5 kg (9.9 lbs)