Dell Force10 MXL Blade - Clear Lldp Counters; Clear Lldp Neighbors

Link Layer Discovery Protocol (LLDP) | 357
advertise management-tlv
Advertise management TLVs (Type, Length, Value).
Syntax
advertise management -tlv {system-capabilities | system-description | system-name}
To remove advertised management TLVs, use the no advertise management -tlv {system-capabilities
| system-description | system-name} command.
Parameters
Defaults
none
Command Modes
CONFIGURATION (conf-lldp)
Command
History
Usage
Information
All three command options — system-capabilities, system-description, and system-name —-can be
invoked individually or together, in any sequence.
clear lldp counters
Clear LLDP transmitting and receiving counters for all physical interfaces or a specific physical
interface.
Syntax
clear lldp counters interface
Parameters
Defaults
none
Command Modes
EXEC Privilege
Command
History
clear lldp neighbors
Clear LLDP neighbor information for all interfaces or a specific interfaces.
Syntax
clear lldp neighbors {interface}
system-capabilities Enter the keyword system-capabilities to advertise the system capabilities
TLVs.
system-description Enter the keyword system-description to advertise the system description
TLVs.
system-name Enter the keyword system-description to advertise the system description
TLVs.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
interface
Enter the following keywords and slot/port or number information:
• For a 10-Gigabit Ethernet interface, enter the keyword
tenGigabitEthernet
followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed by the
slot/port information.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module