124 | Access Control Lists (ACL)
www.dell.com | support.dell.com
Defaults
Not configured.
Command Modes
CONFIGURATION-MAC ACCESS LIST-EXTENDED
Command
History
Related
Commands
mac access-list extended
Name a new or existing extended MAC access control list (extended MAC ACL).
Syntax
mac access-list extended access-list-name
Parameters
Defaults
No default configuration
Command Modes
CONFIGURATION
Command
History
Usage
Information
The number of entries allowed per ACL is hardware-dependent. For detailed specification on entries
allowed per ACL, refer to your switch documentation.
ethertype operator
(OPTIONAL) To filter based on protocol type, enter one of
the following Ethertypes:
•
ev2 - is the Ethernet II frame format.
•
llc - is the IEEE 802.3 frame format.
•
snap - is the IEEE 802.3 SNAP frame format.
count (OPTIONAL) Enter the keyword count to count packets
processed by the filter.
byte (OPTIONAL) Enter the keyword byte to count bytes
processed by the filter.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
permit Configures a filter to forward based on MAC addresses.
seq Configures a filter with specific sequence numbers.
access-list-name
Enter a text string as the MAC access list name, up to 140 characters.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
To Next Page
Loading...
