Dell Force10 MXL Blade - Clear Ip Ospf

Open Shortest Path First (OSPFv2) | 389
Related
Commands
auto-cost
Specify how the OSPF interface cost is calculated based on the reference bandwidth method.
Syntax
auto-cost [reference-bandwidth ref-bw]
To return to the default bandwidth or to assign cost based on the interface type, use the no auto-cost
[reference-bandwidth] command.
Parameters
Defaults
100 megabits per second.
Command Modes
ROUTER OSPF
Command
History
clear ip ospf
Clear all OSPF routing tables.
Syntax
clear ip ospf process-id [process]
Parameters
Command Modes
EXEC Privilege
Command
History
router ospf Enters the ROUTER OSPF mode to configure an OSPF instance.
ref-bw
(OPTIONAL) Specify a reference bandwidth in megabits per second.
Range: 1 to 4294967
Default: 100 megabits per second.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
process-id
Enter the OSPF Process ID to clear a specific process.
If no Process ID is entered, all OSPF processes are cleared.
process (OPTIONAL) Enter the keyword process to reset the OSPF process.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module