Dell Force10 MXL Blade - Show Ip Prefix-List Detail

130 | Access Control Lists (ACL)
www.dell.com | support.dell.com
Defaults
Not configured.
Command Modes
PREFIX-LIST
Command
History
Usage
Information
If you do not use the options ge or le, only packets with an exact match to the prefix are filtered.
Related
Commands
show config
Display the current PREFIX-LIST configurations.
Syntax
show config
Command Modes
PREFIX-LIST
Command
History
Example
Figure 6-9. show config Command Example
show ip prefix-list detail
Display details of the configured prefix lists.
Syntax
show ip prefix-list detail [prefix-name]
Parameters
Command Modes
EXEC
EXEC Privilege
ge min-prefix-length (OPTIONAL) Enter the keyword ge followed by the minimum prefix length,
which is a number from zero (0) to 32.
le max-prefix-length
(OPTIONAL) Enter the keyword le followed by the maximum prefix length,
which is a number from zero (0) to 32.
bitmask number
Enter the keyword bitmask followed by a bit mask number in dotted decimal
format.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
deny Configures a filter to drop packets.
permit Configures a filter to pass packets.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS(conf-nprefixl)#show config
!
ip prefix-list snickers
FTOS(conf-nprefixl)#
prefix-name
(OPTIONAL) Enter a text string as the name of the prefix list, up to 140 characters.