Dell Force10 MXL Blade - Show Interfaces Transceiver

270 | Interfaces
www.dell.com | support.dell.com
show interfaces transceiver
Display the physical status and operational status of an installed transceiver. The output also displays
the transceiver’s serial number.
Syntax
show interfaces [tengigabitethernet slot/port | fortyGigE slot/port] transceiver
Parameters
Command Modes
EXEC
EXEC Privilege
Command
History
Usage
See Figure 14-37 for an command example and see Table 14-8 for a description of the output fields.
tengigabitethernet For a 10G interface, enter the keyword tengigabitethernet followed by the
slot/port information.
fortyGigE
For a 40G interface, enter the keyword fortyGigE followed by the slot/port
information.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module