Dell Force10 MXL Blade - Private-Vlan Mapping Secondary-Vlan

442 | Private VLAN (PVLAN)
www.dell.com | support.dell.com
Only ports (and port channels) configured as promiscuous, host, or PVLAN trunk ports (as described
above) can be added to the PVLAN. No other regular ports can be added to the PVLAN.
After using this command to configure a VLAN as a primary VLAN, use the private-vlan mapping
secondary-vlan
command to map secondary VLANs to this VLAN.
Related
Commands
private-vlan mapping secondary-vlan
Map secondary VLANs to the selected primary VLAN.
Syntax
[no] private-vlan mapping secondary-vlan vlan-list
To remove specific secondary VLANs from the configuration, use the no private-vlan mapping
secondary-vlan
vlan-list command.
Parameters
Defaults
none
Command Modes
INTERFACE VLAN
Command
History
Usage
Information
The list of secondary VLANs can be:
• Specified in comma-delimited or hyphenated-range format.
• Specified with this command even before they have been created.
• Amended by specifying the new secondary VLAN to be added to the list.
Related
Commands
private-vlan mapping
secondary-vlan
Sets the mode of the selected VLAN to primary and then associate
secondary VLANs to it.
show interfaces private-vlan Displays the type and status of PVLAN interfaces.
show vlan private-vlan Displays the PVLANs and/or interfaces that are part of a PVLAN.
show vlan private-vlan mapping Displays the primary-secondary VLAN mapping.
switchport mode private-vlan Sets the PVLAN mode of the selected port.
vlan-list
Enter the list of secondary VLANs to associate with the selected primary VLAN, as described
above. The list can be
in comma-delimited or hyphenated-range format, following the
convention for range input.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
private-vlan mode Sets the mode of the selected VLAN to community, isolated, or primary.
show interfaces private-vlan Displays the type and status of PVLAN interfaces.
show vlan private-vlan Displays the PVLANs and/or interfaces that are part of a PVLAN.
show vlan private-vlan
mapping
Displays the primary-secondary VLAN mapping.
switchport mode private-vlan Sets the PVLAN mode of the selected port.