Dell Force10 MXL Blade - Show Gvrp Statistics

224 | GARP VLAN Registration (GVRP)
www.dell.com | support.dell.com
to
GVRP Participants running on no ports
Related
Commands
show gvrp statistics
Display the GVRP configuration statistics.
Syntax
show gvrp statistics {interface interface | summary}
Parameters
Defaults
none
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 12-3. show gvrp statistics Command Example
Usage
Information
Invalid messages/attributes skipped can occur in the following cases:
• The incoming GVRP PDU has an incorrect length.
• “End of PDU” was reached before the complete attribute could be parsed.
• The Attribute Type of the attribute that was being parsed was not the GVRP VID Attribute Type
(0x01).
show gvrp statistics Displays the GVRP statistics.
interface interface Enter the keyword interface followed by one of the interface keywords and slot/
port or number information:
• For a Port Channel interface, enter the keyword
port-channel followed by a
number: Range: 1-128
• For a 10-Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
• For a 40-Gigabit Ethernet interface, enter the keyword
fortyGigE followed
by the slot/port information.
summary Enter the keyword summary to display just a summary of the GVRP statistics.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS#show gvrp statistics int tengig 1/0
Join Empty Received: 0
Join In Received: 0
Empty Received: 0
LeaveIn Received: 0
Leave Empty Received: 0
Leave All Received: 40
Join Empty Transmitted: 156
Join In Transmitted: 0
Empty Transmitted: 0
Leave In Transmitted: 0
Leave Empty Transmitted: 0
Leave All Transmitted: 41
Invalid Messages/Attributes skipped: 0
Failed Registrations: 0
FTOS#