Dell Force10 MXL Blade - Show Spanning-Tree Mst Configuration; Show Spanning-Tree Msti

378 | Multiple Spanning Tree Protocol (MSTP)
www.dell.com | support.dell.com
show config
View the current configuration for the mode. Only non-default values are shown.
Syntax
show config
Command Modes
MULTIPLE SPANNING TREE
Command
History
Example
Figure 20-3. show config Command Example
show spanning-tree mst configuration
View the multiple spanning tree configuration.
Syntax
show spanning-tree mst configuration
Command Modes
EXEC
EXEC Privilege
Command
History
Example
Figure 20-4. show spanning-tree mst configuration Command Example
Usage
Information
You must enable the multiple spanning tree protocol prior to using this command.
show spanning-tree msti
View the Multiple Spanning Tree instance.
Syntax
show spanning-tree msti [instance-number [brief]] [guard]
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS(conf-mstp)#show config
!
protocol spanning-tree mstp
no disable
name CustomerSvc
revision 2
MSTI 10 VLAN 101-105
max-hops 5
FTOS(conf-mstp)#
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS#show spanning-tree mst configuration
MST region name: CustomerSvc
Revision: 2
MSTI VID
10 101-105
FTOS#