Dell Force10 MXL Blade - Show Qos Statistics

484 | Quality of Service (QoS)
www.dell.com | support.dell.com
Example
Figure 25-7. show qos qos-policy-output Command Example
show qos statistics
View QoS statistics.
Syntax
show qos statistics {wred-profile [interface]} | [interface]
Parameters
Defaults
none
Command Modes
EXEC
EXEC Privilege
Command
History
Example 1
Figure 25-8. show qos statistics Command Example
FTOS#show qos qos-policy-output
FTOS#show qos qos-policy-output
Qos-policy-output qmap_out
Bandwidth-percentage 10
Qos-policy-output qmap_wg
Rate-shape 100 50
Wred yellow wy
Wred green wg
FTOS#
wred-profile interface
Enter the keyword wred-profile and optionally one of the following
keywords and slot/port or number information:
• For a Forty Gigabit Ethernet interface, enter the keyword
FortyGigabitEthernet followed by the slot/port information.
• For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
interface
Enter one of the following keywords and slot/port or number information
• For a Forty Gigabit Ethernet interface, enter the keyword
Forty
GigabitEthernet followed by the slot/port information.
• For a Ten Gigabit Ethernet interface, enter the keyword
TenGigabitEthernet followed by the slot/port information.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS#show qos statistics
Interface Te 0/20
Queue# Matched Pkts
0 0
1 0
2 0
3 0
FTOS#