Dell Force10 MXL Blade - Show Cpu-Traffic-Stats

58 | Control and Monitoring
www.dell.com | support.dell.com
Usage
Information
Reload the system to reset the command-tree counters.
Example
Figure 4-10. show command-tree Command Example
show cpu-traffic-stats
View the CPU traffic statistics.
Syntax
show cpu-traffic-stats [port number | all]
Parameters
Defaults
all
Command Modes
EXEC
FTOS#show command-tree count
!
Enable privilege mode:
calendar command usage:5
set option usage: 0
hh:mm:ss option usage: 0
<1-31> option usage: 0
<MONTH> option usage: 0
<1993-2035> option usage: 0
<MONTH> option usage: 0
<1-31> option usage: 0
<1993-2035> option usage: 0
clear arp-cache command usage:2
clear ip dhcp command usage:1
binding option usage: 0
A.B.C.D option usage: 0
client option usage: 0
statistics option usage: 0
interface option usage: 0
fastethernet option usage: 0
SLOT/PORT option usage: 0
fortyGigE option usage: 0
SLOT/PORT option usage: 0
SLOT/PORT option usage: 0
managementethernet option usage: 0
SLOT/PORT option usage: 0
port-channel option usage: 0
<1-128> option usage: 0
tengigabitethernet option usage: 0
SLOT/PORT option usage: 0
vlan option usage: 0
<1-4094> option usage: 0
conflict option usage: 0
A.B.C.D option usage: 0
server option usage: 0
statistics option usage: 0
snooping option usage: 0
binding option usage: 0
clear ip fib command usage:4
clear ip route command usage:1
FTOS#
port number
(OPTIONAL) Enter the port number to display traffic statistics on that port only.
Range: 1 to 1568
all (OPTIONAL) Enter the keyword all to display traffic statistics on all the interfaces
receiving traffic, sorted based on traffic.