182 | Data Center Bridging
www.dell.com | support.dell.com
show interface pfc statistics
Displays counters for the PFC frames received and transmitted (by dot1p priority class) on an interface.
Syntax
show interface port-type slot/port pfc statistics
Parameters
Command Mode
INTERFACE
Command
History
Example
Figure 9-5. show interfaces pfc statistics Command Example
show qos dcb-input
Displays the PFC configuration in a DCB input policy.
Syntax
show qos dcb-input [pfc-profile]
Parameters
Command Mode
CONFIGURATION
Command
History
Example
Figure 9-6. show qos dcb-input Command Example
port-type Enter the port type.
slot/port Enter the slot/port number.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS#show interface tengigabitethernet 0/3 pfc statistics
Interface TenGigabitEthernet 0/3
Priority Rx XOFF Frames Rx Total Frames Tx Total Frames
-------------------------------------------------------------------------------
0 0 0 0
1 0 0 0
2 0 0 0
3 0 0 0
4 0 0 0
5 0 0 0
6 0 0 0
7 0 0 0
[pfc-profile] Enter the PFC profile.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
FTOS(conf)# show qos dcb-input
dcb-input pfc-profile
pfc link-delay 32
pfc priority 0-1
dcb-input pfc-profile1
no pfc mode on
pfc priority 6-7
To Next Page
Loading...
