Dell Force10 MXL Blade - Stop Jump-Start

Bare Metal Provisioning | 145
Command
History
stop jump-start
Cancel the jump-start reload process.
Syntax
stop jump-start
Command Modes
EXEC Privilege
Command
History
Usage
Information
This command stops the jump-start process while the reload is in progress. However, if the system is
downloading an FTOS image or configuration file, the process is stopped AFTER the DHCP release is
sent.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module