Dell Force10 MXL Blade - Show Users; Timeout Login Response

546 | Security
www.dell.com | support.dell.com
show users
View information on all users logged into the switch.
Syntax
show users [all]
Parameters
Command Modes
EXEC Privilege
Command
History
Example
Figure 29-4. show users Command Example
Table 1 describes the information in the show users command example.
Related
Commands
timeout login response
Specify how long the software will wait for login input (for example, user name and password) before
timing out.
Syntax
timeout login response seconds
To return to the default values, use the no timeout login response command.
Parameters
Defaults
see above
all (OPTIONAL) Enter the keyword all to view all terminal lines in the switch.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Table 1 show users Command Description
Field Description
(untitled) Indicates with am asterisk (*) which terminal line you are using.
Line Displays the terminal lines currently in use.
User Displays the user name of all users logged in.
Host(s) Displays the terminal line status.
Location Displays the IP address of the user.
FTOS#show user
Line User Host(s) Location
0 console 0 admin idle
* 3 vty 1 admin idle 172.31.1.4
FTOS#
username Enables a user.
seconds
Enter a number of seconds the software will wait before logging you out.
Range:
VTY: 1 to 30 seconds, default: 30 seconds.
Console: 1 to 300 seconds, default: 0 seconds (no timeout).
AUX: 1 to 300 seconds, default: 0 seconds (no timeout).