Dell Force10 MXL Blade - Show Version

File Management | 33
Example
Figure 3-11. show startup-config Command Example (Partial)
Related
Commands
show version
Display the current FTOS version information on the system.
Syntax
show version
Command Modes
EXEC Privilege
Command
History
Example
Figure 3-12. show version Command Example
FTOS#show startup-config
! Version E8-3-16-29
! Last configuration change at Thu Apr 26 19:19:02 2012 by default
! Startup-config last updated at Thu Apr 26 19:19:04 2012 by default
!
boot system stack-unit 0 primary system: A:
boot system stack-unit 0 secondary tftp://10.11.200.241/
dt-m1000e-5-c2
boot system gateway 10.11.209.254
!
redundancy auto-synchronize full
redundancy disable-auto-reboot stack-unit
!
redundancy disable-auto-reboot stack-unit 0
redundancy disable-auto-reboot stack-unit 1
redundancy disable-auto-reboot stack-unit 2
redundancy disable-auto-reboot stack-unit 3
--More--
show running-config Displays the current (running) configuration.
Version 8.3.16.1 Introduced on MXL 10/40GbE Switch IO Module
Table 3-2. show version Command Fields
Lines beginning with Description
Dell Force10 Network... Name of the operating system
Dell Force10 Operating... OS version number
FTOS#show version
Dell Force10 Real Time Operating System Software
Dell Force10 Operating System Version: 1.0
Dell Force10 Application Software Version: E8-3-16-29
Copyright (c) 1999-2012 by Dell Inc. All Rights Reserved.
Build Time: Thu Apr 26 05:41:48 PDT 2012
Build Path: /sites/sjc/work/build/buildSpaces/build03/E8-3-16/SW/SRC/Cp_src/
Tacacs
FTOS uptime is 13 hour(s), 29 minute(s)
System image file is "system://A"
System Type: MXL-10/40GbE
Control Processor: MIPS RMI XLP with 2147483648 bytes of memory.
256M bytes of boot flash memory.
1 34-port GE/TE/FG (XL)
48 Ten GigabitEthernet/IEEE 802.3 interface(s)
2 Forty GigabitEthernet/IEEE 802.3 interface(s)